You have just purchased an air cleaner for your bedroom. Now that the air cleaner is installed, you want to verify that it is still working well. As with most people, you accept an air conditioner running well as long it gives adequate cooling. After all, you bought an air conditioner with 5-star ratings from a respected company. Therefore, you are confident that it will work well, be energy efficient, and last a lifetime. This post will provide some tips and tricks to help you service your Samsung air conditioner price in Bangladesh.
The best selection of place and the highest quality of placing
The majority of shoppers don't know where to put an air conditioner, so they go with the expert's advice. You should know what the placement requirements are and be able to talk to the expert.
Keep these key points in mind:
Window air conditioner
A window conditioner must be placed on the top of each window. This will allow the cool air that is heavy to settle downwards and create its cool flow cycle. It is preferable to place the air conditioner in the same spot if an opening has been made in the wall.
The 1.5-inch window size of the air conditioner depends on the star rating. Various brands for products below 1.5 have maintained window sizes. Others have reduced them. It would help if you made modifications to the window in such cases before ordering or delivering. The placing expert will attach it to two sides and fill the gap with cardboard insulation. This could become a source of vibration in the future.
The condenser cools by drawing air from three sides. If there isn't enough space, efficiency will suffer. Hitachi recommends 200mm on the right and left and 100mm on top. You will see that this requirement is not being observed in many air conditioner places.
Smooth condensate flow to the drainpipe can be achieved by placing the air conditioner with an inclination of at least 10mm above the front bottom. If condensate is not flowing smoothly to the drainpipe, you may experience rusting problems after 4 to 6 years.
Avoid direct sunlight on the condenser. It can cause problems during peak summertime and will result in poor cooling. This is why it is better to put a sunshade above the window conditioner.
Split air conditioner
The ideal place to put the outdoor and indoor systems should be identified. This is the preferred place. It should be easy to reach from any balcony, window, or surface platform. This allows for cleaning and servicing when necessary. However, direct sunlight will affect the condenser's performance. If it is impossible to avoid direct sunlight, you can add a sunshade to the top.
- Make sure the expert places the condenser fan motor in a proper gap between the wall, outdoor system, and wall. This will ensure that adequate airflow is created over the condenser.
- The outdoor system has two refrigerant pipes. One is to bring the air into the cooling process, and the other is to remove the cool air.
You must ensure adequate insulation to prevent condensation and water-dropping during the service period and loss inefficiency.
- The indoor condensate must be collected in a drain pad and moved without obstruction. If it is not, it could cause water damage and leakage.
The indoor system must be mounted on the wall such that it does not direct airflow towards the main bedroom door. Therefore, it is suggests to place the indoor system as shown in this figure.
Final measurements and testing
After placing the order, verify the following:
Input voltage
- The machine's power consumption when the compressor runs and when it stops. The current consumed when the compressor runs indicated on the system's nameplate. It must not exceed 6 volts and should not exceed 6.
- The temperature at which the suction side is warmer than the one on the other.
Keep a record of the measurements to help you evaluate after your next service. For instance, you can see that your air conditioner may need servicing if the power consumption is greater than last year's. So keep track of these parameters.
Maintenance on Air Conditioners
AC price in BD necessitate being maintained regularly. First, they must be cleaned and checked for current. This will indicate whether the gas pressure is the same as when it was first filled. Poor maintenance can cause less cooling and greater power consumption.
It would improve if you were careful when servicing your air conditioner:
Make sure to observe the cleaning procedure when you maintenance. This will ensure that your coils are cleaned to the highest standard. Other than cleaning, there is no preventive maintenance plan for your air conditioner.
Gas leakage
After 3-4 years of use, the rubber mounting and parts used to secure the product may deteriorate.
If you attempt to repair gas leakage with brazing, it is a dangerous practice that can loosen other joints. Gas leakage is something that happens frequently.
Insulation
It is important to ensure that insulation in connecting pipes is maintained. This will prevent the air conditioner from losing cooling, power consumption, or water. Make sure to ask an expert for proper insulation when servicing is completed.
Conclusion
It is crucial to discover the best product. However, it is equally important that you place the order correctly and maintain the product. For instance, an efficient and well-maintained Midea ac price in Bangladesh will provide cooling that lasts longer and consumes less power.
Tags:
Comments